menuMENU    UK Free TV logo Freeview

 

 

Click to see updates

Connecting it all up

Why are there so many sorts of connecting cables? Find out with this quick guide.

Why are there so many sorts of connecting cables?  Find out wit
published on UK Free TV

Why are there so many sorts of connecting cables? Find out with this quick guide.

The connectors on each cable are called plugs (and are also called male) and they will usually fit only into one sort of socket (or female connector).

Most cables you will come across are male to male. Occasionally you will find leads with a socket on one end and a plug on the other, and these are called "extension cables".

SCART



The SCART cable is used to connect a set-top box to a television set, or to a video recorder. This can only be a short cable. The SCART cable carries all of these types of signal:

  • analogue stereo sound
  • a single RGB television picture
  • a single composite video picture
  • a single S-Video video picture
  • widescreen picture signal


As stereo sound, RGB picture and widescreen signal is the best possible combination for digital television viewing, it is vital to use a SCART lead between any set-top box and the main television.

The composite video picture with stereo sound is the best combination for a VHS video recorder. If your set-top box has two SCART sockets, it is likely that the one marked TV will carry RGB picture information and the other will not.

If your television has more than one SCART input, you may need to choose a special one (marked RGB) if you want to use RGB from the SCART cable.

On most set-top boxes it is possible to turn the RGB output on and off. This can be used to test the RGB input function on the television ? the picture quality appears blurred when it is disabled.

If have a DVD player, rather than a VHS recorder, you can attach this to the set-top boxes second SCART connector. The signal from the set-top box will normally be overridden by the DVD player when it is on, usually in high-quality RGB.

Some very cheap SCART cables do not have all the pins connected. They may not provide RGB and widescreen picture signals. SCART cables are normally no more than three metres in length.

UHF lead



The UHF lead is a lead that you would traditionally associate with television signals. They can carry:

  • up to 45 (but normally only five) analogue television channels
  • a single picture from a set-top box
  • around 50 analogue cable TV channels
  • mono sound
  • NICAM stereo sound
  • Teletext services (for example, Ceefax)


You can't avoid these cables if you are going to use Freeview, as these cables are the only ones that you can use to distribute Freeview signals around the house.

Where you have an integrated digital television (an idTV) you just need to get the signal from the aerial to the television with one of these cables.

If you are using a Freeview set-top box, you will need to get the signal from the aerial to the set-top box using this aerial lead, but for best results connect the TV to the box with a SCART cable.

You can also use a UHF lead to connect a set-top box to a television somewhere in the house. Your set-top box will require a RF (radio frequency) modulator. Note that "RF passthough" is another way of saying there is no modulator. You will be able to "tune" the second television into the picture showing on the set-top box.

Some boxes (all Sky boxes) have the ability to connect a remote control receiver to the second TV end of the interconnecting cable, so you can change channels.

The set-top boxes, whilst providing a reasonable quality picture to the second TV, will always provide only mono sound via a UHF lead.

The step-change in picture quality obtained by switching to RGB on a SCART is far greater than any obtained though spending any more on a gold-plated SCART cable.

Satellite or cable TV cable



These cables are usually very stiff, and have a very basic screw connector on the end. Usually they will provide an unbroken link to the satellite dish. At the dish end they plug into the device on the end of the arm, the LNB.

Don't try to disconnect these cables when the set-top box is on. Usually there is a small voltage that will cause dangerous sparks.

If the cable connects to a satellite dish, there is not much you can do with the cable. Each receiver in the set-top box needs it's own wire to the LNB. With a personal video recorder (such as Sky+), or a multi-room installations there are two cables to the four-output LNB on the dish. If you want more rooms, each will require it's own cable.

If the cable is providing cable TV, then it is possible to use inexpensive "Y connectors" to link the incoming signal to various set-top boxes, cable modems, or - via an adaptor - directly to the back of a TV.

Composite video cable



This is the most simple and basic video connection you can get. It carries:

  • a single picture from a set-top box


The picture will be in colour, and of comparable quality to a analogue broadcast station. However, there is no sound. For that reason this cable is often found joined to a stereo audio cable.

These signals are quite robust and can be carried for many metres. Often modern television sets have a single yellow photo input on their front input panel.

You also use an identical cable to carry digital stereo (SPDIF) sound.

Stereo audio cable





These cables carry the left and right channels of sound on two joined cables. They are usually required when a SCART cable is not being used, as the SCART cable already carries stereo sound.

If you are connecting your set-top box to an external stereo system, a separate stereo audio is used.

There is no real practicable limit to the length of these cables, but excessive length will degrade the quality of the signal.

S-video cable



The S-video standard is not well supported by most UK digital TV boxes, and very few have a S-video socket. If you need one for a particular analogue camcorder, use it, but avoid S-video with digital television. If you are using what appears to be a monochrome picture from a SCART lead, it will certainly by an incomplete S-Video signal and you should change to the RGB input.

VGA cable



This is the cable you will use to connect a computer to a old style monitor, and some modern LCD screen too. Most modern LCD TVs will have a VGA input too.

If you want to connect a set-top box to a LCD monitor, you can buy a conversion box from around 60. However this will not result in a better picture than using an existing SCART socket if there is one.

The only way to get higher than normal television resolution is to use a VGA in conjunction with a personal computer or modern games console.

DVI cable



If you want to get the very best out of a television or monitor use a digital video interconnect (DVI) cable.

This will be the only way for most televisions and monitors to receive high-definition pictures from a computer, and some set-top boxes.

If you can use either a VGA cable or a DVI cable, choose the DVI option.

HDMI cable



If you want to get the very best out of a television use a HDMI cable.

This will be the only way for most televisions to receive high-definition pictures from set-top boxes.

Help with Television sets?
Why are all TVs on sale not digital?1
Do I still have to pay for a TV licence?2
I had perfect channel 5 reception - until I got a digital TV box!3
I Have a Pocket Tv For taking out so I can keep up with news and sport. Will thi4
The pictures from my digital box are all green!5
In this section
Loft aerials1
Do I need to buy a booster?2
How to receive Freeview on your PC3
Indoor aerials4
Whole house digital TV5
Now and Next6

Comments
Monday, 2 April 2012
S
Sandy G
10:52 AM

Trying to copy from sky+ box hard disk to vcr with scart cables with no sucess.Have followed instructions as how to make make the correct connections reguarding cables is there something I am missing.

link to this comment
Sandy G's 1 post GB flag
Saturday, 7 April 2012
N
NikL93
5:28 PM

On 04/04/2012 - I lost BBC2 transmission. I purchased a Dion twin scart digital top box which I installed today. The problem is I have excellent picture quality on all the channels - but only in black & white. I rang the Tesco help-line and the technician suggested it could be a SCART problem - Any ideas?

link to this comment
NikL93's 1 post GB flag
M
Mazbar
sentiment_satisfiedGold

6:56 PM

Nikl it could be one of two things one the scart lead is not in all the way on each end try putting it in all the way the other is if your tv is a panasonic and it is av2 it might say av2s if so press the green button on the tv remote this should send it back to just av2 or change the scart lead to av1 hope this helps.

link to this comment
Mazbar's 384 posts GB flag
Tuesday, 17 April 2012
C
Carole
7:12 PM

could you please tell me how to connect my free view box to my freesat tv to record freeview channels

link to this comment
Carole's 1 post GB flag
J
jb38
sentiment_very_satisfiedPlatinum

8:09 PM

Carole: If by Freeview box you are referring to a Freeview PVR then you cannot record anything onto it, as it only records from its own internal tuner.

If though you are not meaning as was mentioned, then what recording device are you referring to?

link to this comment
jb38's 7,179 posts GB flag
Wednesday, 18 April 2012
A
Andy
11:14 PM

Hi I need to connect tv to freeview box to vcr to satalite box. all have 2 scarts. please could you help with this also all have rf in-out .

link to this comment
Andy's 1 post GB flag
Tuesday, 24 April 2012
C
Claire Frank
8:44 PM

Hello, I have a tv, a dvd recorder and a freeview box that all worked together until the switch over, ie I could watch tv, record a programme while watching another one or watch a dvd. When the switch over happened I discovered that my freeview box was too old to receive the new service so I bought a new one. Now I have connected it and got all my tv channels back but it hasn't found the dvd machine, and I can't work out how to connect it as all the new leads seem to be in the right place but b nothing shows even if I run a dvd and try to find it. I think I must change the lead set up now but have tried and can't figure it out. All of them have two scart leads, can you help?

link to this comment
Claire Frank's 1 post GB flag
Wednesday, 25 April 2012
S
Sarah
3:44 PM

Hi,

My son has an LG tv and its mounted on the wall. The only socket we can use due to the wall mountis the usb port. Can you use the usb port to attach a dvd player? Ive seen a few dvd players with usb on and I didnt know if you can get a wire to connect the dvd player to the tv so you can watch films off the player.

I would really appreciate some help as Im not very technical.

Thankyou

link to this comment
Sarah's 1 post GB flag
Dave Lindsay
sentiment_very_satisfiedPlatinum

4:12 PM

Sarah: I think that the main reason for USB sockets appearing on DVD players, TVs etc is so that you can put photos and maybe videos onto a USB pen drive and play them. The USB socket isn't for connecting it to the TV.

If there are HDMI sockets on both the DVD player and TV, then that should be the prefered method of connecting the two, even if there are no HD pictures to show. Failing that, use the scart.

You can get right angle adaptors for these things. For example, put <<right angle hdmi>> into Google. There are right angle scart adaptors, but looking at photographs of them, I'm not sure how much space they might save.

I'm surprised that the wall mount blocks access to the sockets on the TV.

link to this comment
Dave Lindsay's 5,724 posts GB flag
J
jb38
sentiment_very_satisfiedPlatinum

5:11 PM

Claire Frank: Does your DVD recorder have a Freeview tuner? or does it normally record from the Freeview box?

link to this comment
jb38's 7,179 posts GB flag
Select more comments

Your comment please
Please post a question, answer or commentUK Free TV is here to help people. If you are rude or disrespectful all of your posts will be deleted and you will be banned.







Privacy policy: UK Free Privacy policy.