menuMENU    UK Free TV logo Help!

 

 

Click to see updates

How do I change the RF output channel on a Sky Digibox?

How do I change the RF output channel on a Sky Digibox?

How do I change the RF output channel on a Sky Digibox?
published on UK Free TV

Press the [SERVICES] button and then press [4] [0] [1] then [SELECT]



Then press [4] to go to the RF output menu.



You can now change the value so that it does not clash with an analogue TV channel or a Freeview multiplex.

HD and "new EPG" boxes

If you have a HD box, press [SERVICES] button and then press [0] [0] [1] then [SELECT]. Nothing is shown on the TV screen until you press the Select button.

Then use the [RIGHT] arrow button on the remote until this screen is shown, and press SELECT to change the values:



All questions
BBC Three Linear channel re-opens1
Removing all barriers to communication between diverse cultures2
How do I get a test card with Freeview3
What can I do when my Sky Digibox says 'No Signal' or 'Technical fau4
Can I receive UK TV in Ghana?5
In this section
Can I use my ex-contract sky digital satellite receiver to get Freeview channels1
What can I do when my Sky Digibox says 'No Signal' or 'Technical fau2
Can I stop paying Sky and use my satellite receiver to get Freeview ?3
I have a Panasonic TV with integrated Freeview how can I record Freeview channel4
My Sky box has a "no signal message" - what do I do?5
I have split the signal from my satellite dish and now nothing works.6

Comments
Thursday, 8 September 2011
S
Steve P
sentiment_satisfiedGold

6:15 PM

michelle: I'm confused too, but thought you should know someone saw your question!

By "Magic Eye" I presume you mean something that commands a skybox elsewhere from the bedroom. I presume there is some box that connects the eye to the coax?

Can't understand how bedroom TV would STOP a remote working. As Sky?

link to this comment
Steve P's 1,173 posts GB flag
Briantist
sentiment_very_satisfiedOwner

9:52 PM

Steve P: Yes, I'm really puzzled by this. The only thing I can think is that there is a fault in the "Magic Eye" device itself.

link to this comment
Briantist's 38,915 posts GB flag
Friday, 9 September 2011
S
Steve P
sentiment_satisfiedGold

12:48 AM

I meant to say "Ask Sky?" !

Magic Eyes can be very tricky - I had trouble getting one to work with a particular remote, but forget the detail.

link to this comment
Steve P's 1,173 posts GB flag
Briantist
sentiment_very_satisfiedOwner

7:40 AM

Steve P: I was talking to a Sky engineer the other day and he said that the "Magic Eye" had been depreciated by Sky about two years ago.

This was for two reasons: they are problematic after switchover (being analogue), and Sky prefer to sell people the extra-£10-a-month Multiroom subscription.

link to this comment
Briantist's 38,915 posts GB flag
P
Paul777
10:28 AM

I've lost the 9V supply from my RF2 on my old sky+ box. It was only feeding a TV in my bedroom. Is there anything Ican buy to inject a 9V dc supply onto my coax cable to enable my magic eye?

Thanks

link to this comment
Paul777's 1 post GB flag
M
Mike Dimmick
sentiment_very_satisfiedPlatinum

12:40 PM

Briantist: Magic Eye also relies on signals travelling back up the coaxial cable (reportedly a modulated carrier at 47 MHz). Splitters need to be able to pass those signals back to the Sky box.

I don't quite see why it only works if the bedroom TV is off, though. Perhaps when it is on, the TV is also trying to supply power on the aerial cable, and that throws off the power supply to the Magic Eye receiver?

michelle: See if the TV has an 'aerial power' or 'antenna power' option. If it does, try turning it off.

(Pet peeve: 'Deprecated' means not really supported any more, planned to be phased out. 'Depreciated' means a reduction in value over time.) 

link to this comment
Mike Dimmick's 2,486 posts GB flag
Saturday, 10 September 2011
Briantist
sentiment_very_satisfiedOwner

9:42 AM

Mike Dimmick: Yes, I have a dim recollection of someone showing me how the Magic Eye return signal worked when the original boxes first came out - it is not the most "high tech" of solutions, but it works.

link to this comment
Briantist's 38,915 posts GB flag
J
Jim F
sentiment_satisfiedSilver

6:24 PM

Mike Dimmick: Remote eye signals I've measured with an oscilloscope use a carrier frequency of 7MHz, amplitude modulated corresponding with the IR LED flashing from the Sky remote (shortest pulse lengths around 0.6ms).

link to this comment
Jim F's 141 posts GB flag
J
Jim F
sentiment_satisfiedSilver

6:27 PM

michelle: The Sky remote eye can somtimes pick up interference from inside the telly - you may find that you need to have a shortish length of coax cable to connect the remote eye to the TV aerial input (which enables the remote eye to be further from the TV set). Having the remote eye plugged directly into the TV does sometimes give trouble.

link to this comment
Jim F's 141 posts GB flag
J
Jim F
sentiment_satisfiedSilver

6:41 PM

Paul777: You could buy a reconditioned Sky+ or SkyHD box to save having an additional item taken up a 13A socket.
What you're asking for is a power supply similar to that used for powering a masthead amplifier (coax connectors with 12V DC on one side that connect to the aerial, but in your case needs to go to the magic eye. The other DC blocked side needs to go to the Sky box RF2 connector).
I've not seen a masthead power supply with a 9V output, and 12V is more than the specified 9V from the RF2 socket - but I have seen this arrangement work in exactly your situation. However, I can't say I've tried this with every make of magic eye.
Losing the 9v power from the RF2 output is a relatively common failure for Sky+ boxes.

link to this comment
Jim F's 141 posts GB flag
Select more comments

Your comment please
Please post a question, answer or commentUK Free TV is here to help people. If you are rude or disrespectful all of your posts will be deleted and you will be banned.







Privacy policy: UK Free Privacy policy.