menuMENU    UK Free TV logo Help!

 

 

Click to see updates

How do I change the RF output channel on a Sky Digibox?

How do I change the RF output channel on a Sky Digibox?

How do I change the RF output channel on a Sky Digibox?
published on UK Free TV

Press the [SERVICES] button and then press [4] [0] [1] then [SELECT]



Then press [4] to go to the RF output menu.



You can now change the value so that it does not clash with an analogue TV channel or a Freeview multiplex.

HD and "new EPG" boxes

If you have a HD box, press [SERVICES] button and then press [0] [0] [1] then [SELECT]. Nothing is shown on the TV screen until you press the Select button.

Then use the [RIGHT] arrow button on the remote until this screen is shown, and press SELECT to change the values:



All questions
BBC Three Linear channel re-opens1
Removing all barriers to communication between diverse cultures2
How do I get a test card with Freeview3
What can I do when my Sky Digibox says 'No Signal' or 'Technical fau4
Can I receive UK TV in Ghana?5
In this section
Can I use my ex-contract sky digital satellite receiver to get Freeview channels1
What can I do when my Sky Digibox says 'No Signal' or 'Technical fau2
Can I stop paying Sky and use my satellite receiver to get Freeview ?3
I have a Panasonic TV with integrated Freeview how can I record Freeview channel4
My Sky box has a "no signal message" - what do I do?5
I have split the signal from my satellite dish and now nothing works.6

Comments
Sunday, 16 January 2011
C
colin
5:10 PM

hi i have a sky+ box,i have turned the rf 2 output on via the guidelines & saved the setting,but i have no red light on my magic eye,i have tried this on my hd box in another room & the light works,could this mean my box is faulty?

link to this comment
colin's 1 post GB flag
D
dom
10:13 PM

the best thing to do is change one at a time and then you will find the cause of the problem becuse else you will get hacked off having to buy it all again when it was something cheap and stupid

link to this comment
dom's 1 post NO flag
Monday, 17 January 2011
Briantist
sentiment_very_satisfiedOwner

8:16 AM

dom: Yes, that is correct.

link to this comment
Briantist's 38,915 posts GB flag
Briantist
sentiment_very_satisfiedOwner

8:23 AM

colin: Yes, as you say, this is likely to be a fault with the Sky box.

link to this comment
Briantist's 38,915 posts GB flag
Briantist
sentiment_very_satisfiedOwner

9:27 AM

Anna Plummer: I'm still not sure what isn't working.

I would try getting a signal on the "RF2" set without the Magic Eye connected first.

link to this comment
Briantist's 38,915 posts GB flag
Tuesday, 18 January 2011
D
Davie
8:26 PM

I have put a sky+ box in the loft(each room has a digital coax run from loft)connected bedroom cable to RF2(switched on in settings)other end in bedroom is on a wall plate, then to a magic eye. problem is picture is terrible good colour but has annoying moving diagnal lines

link to this comment
Davie's 3 posts EU flag
L
Lee
8:43 PM

Hi Please can you help
we have power at the magic eye but cant get a picture on the TV any ideas, many thanks

link to this comment
Lee's 1 post GB flag
Wednesday, 19 January 2011
Briantist
sentiment_very_satisfiedOwner

9:27 AM

Lee: How have you tried to tune to the TV into the output of the Sky box?

link to this comment
Briantist's 38,915 posts GB flag
Briantist
sentiment_very_satisfiedOwner

9:33 AM

Davie: Yes, much as you would expect with analogue distribution.

link to this comment
Briantist's 38,915 posts GB flag
D
Davie
11:48 AM

Hi Briantist
how can I get the picture clearer? is the problem the wall plate, nothing is connected to anything anologue though.

link to this comment
Davie's 3 posts EU flag
Select more comments

Your comment please
Please post a question, answer or commentUK Free TV is here to help people. If you are rude or disrespectful all of your posts will be deleted and you will be banned.







Privacy policy: UK Free Privacy policy.