How do I change the RF output channel on a Sky Digibox?
Brian Butterworth published on UK Free TV Press the [SERVICES] button and then press [4] [0] [1] then [SELECT]
Then press [4] to go to the RF output menu.
You can now change the value so that it does not clash with an analogue TV channel or a Freeview multiplex.
HD and "new EPG" boxes
If you have a HD box, press [SERVICES] button and then press [0] [0] [1] then [SELECT]. Nothing is shown on the TV screen until you press the Select button.Then use the [RIGHT] arrow button on the remote until this screen is shown, and press SELECT to change the values:
All questions
In this section
Tuesday, 20 September 2011
J
Jimm Hall2:16 PM
Can any one help please,
I have Sky+hd box, in one room and a pace digibox, in another, since swopping them around from one room to the other I have lost ch5 fiveUS and five*, I have a white sky card for the free programmes.
| link to this comment |
S
Steve P5:15 PM
Jimm -
Both satellite systems? Each with its own lead to an LNB?
And both used to have 5/5US/5* and both have lost them?
But everything elsre OK?
Odd.
Do they appear on the listings but not work, or gone entirely?
| link to this comment |
J
Jimm Hall8:54 PM
Hi Steve,
They have gone, not even in the listings, if I press for 105, or 174, it comes up channel unavailable.
| link to this comment |
Wednesday, 21 September 2011
W
wayne8:50 AM
I have been watching sky tv on my tv in another room via tuning the tv in the other room into sky via an anologue channel (used channel 38). Digital changeover has now completed in my area (WR5 2)and on retuning the tv in other room it only picks up digital channels and so is not receiving sky in any way. Is there a way I can still pipe the sky to tv's in other rooms via the coaxial cable, which is routed via a router box in my loft. Should have mentioned, tv in other room has freeview built in.
| link to this comment |
wayne's: mapW's Freeview map terrainW's terrain plot wavesW's frequency data W's Freeview Detailed Coverage
Thursday, 22 September 2011
wayne: You will need to switch to "analogue mode" to tune into the signal from the Sky box.
| link to this comment |
J
Jimm Hall9:09 AM
I have now sorted my problem re,
Can any one help please,
I have Sky+hd box, in one room and a pace digibox, in another, since swopping them around from one room to the other I have lost ch5 fiveUS and five*, I have a white sky card for the free programmes.
Switched the box's off unplugged from mains for an a hour awitched on and the are there now.
| link to this comment |
A
Alison Gold10:30 AM
Hi, I got a new Sky HD box and have set it up fine. Up until now, Sky has been set up so that it can be viewed in every room, but since the new box has arrived, I can't see it in any room at all. I've tried searching via manual tuning but nothing. Please help if possible.
| link to this comment |
Alison Gold: You need to ensure whichever aerial cable was plugged into the "RF2 out" of your old Sky box is plugged in to the "RF2 out" of your new box.
| link to this comment |
A
Alison5:40 PM
Hi Briantist, yes, I made sure I put the aerials in the right boxes but still won't work :-(
| link to this comment |
S
Steve P6:15 PM
Alison - are you sure the new box supports remote viewing?
Do you perhaps have to switch on an "RF OUTPUT" option?
Did you by any chance recall the maxim "When all else fails, RTFM?" (Read The Manual).
| link to this comment |
Select more comments
Your comment please