menuMENU    UK Free TV logo Archive (2002-)

 

 

Click to see updates

TVs and boxes that do not support the 8k-mode

Here is the list from Digital UK of boxes and sets that will not receive Freeview after switchover is complete

Here is the list from Digital UK of boxes and sets that will no
published on UK Free TV

If you use one of these to watch Freeview, or are hoping to after switchover happens in your region, you will need to get a new Freeview box at switchover.

ONdigital/ITVdigital branded set top boxes

Nokia Mediamaster 9850T; Pace DTR730 and DTR735, Philips DTX6370, DTX6371 and DTX6372; Pioneer DBRT200 and DBRT210, Sony VTX-D500; Toshiba DTB2000.

If you have any of these you will need to recycle it and get a new box.

Freeview branded set top boxes

Fusion FRT100*, Pace DTVA-T "Wedge Adaptor", DT210F*, Samsung SIRU200i (Without M suffix).

Freeview, ONdigital and ITV branded integrated digital television sets

Alba ONdigital sets, Bush ONdigital sets.

Hitachi 28WDDODTN, 32WD40DTN and D36W840DTN; Panasonic TX-28DT2, TX-32DT2, TX-28DT30*, TX-32DT30*, TX-36DT30*, TX-36DT35* and TX-32DH40*; Philips 28DW6734, 32DW6834, 32DW9625, 28DW6557* and 32DW6557*.

Sanyo CE28DFN1-B, CE32DFN1-B, CE28DFN2-B, CE32DFN2-B, CE32DFN2BK-B, CE28DWN1-B, CE28DFN3-B-00, CE32DFN3-B-00, CE30LD3-B,CE30LD3BK-B, CE27LD3-B, CE23LD4-B, CE23LD4W-B, CE27LD4-B, CE27LD4BK-B, CE32LD4-B, CE32LD4BK-B, CE27LD5-B and CE32LD5-B.

Sony 28DS60, 32DS60, 28DS65, 32DS65, 28DX20, 32DX20, 28DX30, 32DX30, 28DS20, 32DS20, KP41DS1, KP51DS1, KP51DS2, KP41DS1, KP51DS1, KP51DS2, KD28DX40*, KD32DX40*, KD32DX100*, KD32NX100*, KD32NX200*, KD36NX200*; Toshiba 28WT98B, 32WT98B, 28ZT29B, 32ZT29B, 36ZT29B, 42WT29B, 50WT29B and 57WT29B.

All these sets can be upgraded - contact the supplier (numbers below) to add a Freeview box to the set.

Boxes that do not support both 2k and 8k modes

Some boxes are having problems during switchover supporting both modes at the same times:

  • Sharp TU-R160H
  • Humax 9200T
  • Thomson DTi 1000


The workaround appears to be to add the "8k" channel manually (C62 for Selkirk, for example) and then to do this procedure after switchover is complete: My Freeview box has no EPG, is missing Film4, Channel 4+1, no sound on ITV3 or the channel line up is wrong - ukfree.tv - independent digital television and switchover advice, since 2002

This is on top of the boxes that could not cope with the changes to the Network Information Table (NIT): Daewoo DS608P, Labgear DTT100, Triax DVB 2000T, Portland DP100 and these VCR/STBs: Daewoo SV900, Bush IDVCR01

Helpline numbers

  • Alba 0871 230 1777
  • Bush 0871 230 1777
  • Daewoo 0870 100 2525
  • Hitachi 0870 405 4405
  • Humax 0870 247 8800
  • Nokia 0845 045 5555
  • Pace 0870 120 1910
  • Panasonic 0800 169 3012
  • Philips 0870 900 9070
  • Pioneer 0330 123 1240
  • Sharp 08705 274 277
  • Sony 08705 111999
  • Thomson 01443 220220
  • Toshiba 0115 976 6958


Help with Freeview, aerials?
How do I get a test card with Freeview1
I would like to know if it is possible to receive UK terrestrial Freeview servic2
I have been told I would receive too much singal from my Freeview tansmitter as 3
Can my Freeview box receive more than one BBC and ITV region?4
Is it true that my 87 year old mother is entitled to a FREE upgrade when the ana5
In this section
Should the UK close down the TV networks to allow for more mobile broadband? 1
UK Digital switchover ends - Northern Ireland completes on 24th October 20122
The last day of analogue television in the UK - goodbye PAL3
2 days left of analogue television - goodbye teletext4
3 days of analogue to go - goodbye to NICAM 7285
Changes to Saorview frequencies and power levels, 24th October 20126

Comments
Sunday, 12 February 2012
M
Martin
11:52 AM
Reading

It IS possible to record a TV freeview broard cast on a video recorder (VCR). I is possible to record via the scart socket in much the same procedure as recording from a camcorder. However, automated/timed recordings are less convienient as you need to leave the TV `on' to use its tuner for the reception, as the VCR's tuner is now defunct. If you dispose/recycle your VCR, you will NOT be able to play any of your video cassettes you may have a collection of.
Disposing of a perfectly servicable VCR recorder is following BAD advice! The same goes for disposing of a DVD recorder, there are workarounds for BOTH of these types of machine! ONLY the tuner sections of these machines are defunct, their recording facilities remain working!! They'll both record via the scart socket and the TV's scart output.
good luck on switching over
Martin

link to this comment
Martin's 3 posts GB flag
Martin's: mapM's Freeview map terrainM's terrain plot wavesM's frequency data M's Freeview Detailed Coverage
Wednesday, 7 March 2012
M
Martin
9:38 PM
Reading

I am pleasantly surprised at how easily and well a videocasstte recorder records HD! Even the sound is great. DVD recorder is even better, with HD being really good. Both my recorders are Samsung's units, the videocassette unit is a nicam stereo 4 head unit unit. Tapecassettes are still available if you shop around.
My TV system is connected to my broardband connection, (Hitachi freeviewHD box) but it tells me that I am unable to stream video? can anyone enlighten me about what this is about?

link to this comment
Martin's 3 posts GB flag
Martin's: mapM's Freeview map terrainM's terrain plot wavesM's frequency data M's Freeview Detailed Coverage
Saturday, 10 March 2012
D
Dick
12:15 PM

I have a Humax F2 FOXT box and live in Brighton. I've retuned the box and can't receive a number of channels (including BBC1, BBC2 and BBC3 although BBC4 is fine). I have a Panasonic TV with a Freeview receiver running off the same aerial via a simple splitter and that is fine. I get a "no or bad signal" message for the BBC channels. Any ideas?

link to this comment
Dick's 7 posts GB flag
Dave Lindsay
sentiment_very_satisfiedPlatinum

5:01 PM

Dick: Check that BBC1 is tuned to UHF channel 60 for Whitehawk and not channel 24 which is Rowridge.

If it is tuned to Whitehawk, I wonder, could be too high a signal level? See Freeview signals: too much of a good thing is bad for you | ukfree.tv - independent free digital TV advice

link to this comment
Dave Lindsay's 5,724 posts GB flag
D
Dick
6:24 PM

Thanks Dave, according to the preferences the UHF channel was set to 60. The signal strength was running at 59% for BBC1 and around 67% for other channels. As I said. most other channels are fine and I have all channels working fine off the same aerial on the Freeview tuner on my Panasonic TV.

I followed your link and did a reset to default values and a retune. BBC now seems set to 24 and although I'm getting BBC1 and 2 it's pixellated with a lot of interference and I'm still getting the message "no or bad signal". The signal strength is 34%.

Now I can't find a way to change BBC1 back to 60. When I look at the UHF parameter it says 60 but checking the channel it seems set to 24 again.

I'll give Humax a ring on Monday.

Thanks for your help!

Cheers

Dick

link to this comment
Dick's 7 posts GB flag
Dave Lindsay
sentiment_very_satisfiedPlatinum

6:49 PM

Dick: Fortunately Rowridge uses low channels and Whitehawk high ones. A simple way to stop Rowridge being picked up during the automatic tuning scan is to run it with the aerial lead unplugged until it gets to 50%.

link to this comment
Dave Lindsay's 5,724 posts GB flag
Dave Lindsay
sentiment_very_satisfiedPlatinum

7:17 PM

Dick: Try removing the aerial plug from the Humax and holding it close (a centimetre or two away) whilst tuned to BBC1 on C60. You will need to run the scan with the aerial unplugged up to 50% to get it back on C60.

Unplug it with the signal strength screen on. Wait ten seconds or so for it to adjust and see if there is an improvement. The aim is to see if there is too much signal and holding it like that should loose some.

Another way of loosing some signal is, if it is a screwed together aerial plug, remove the metal outer part of the plug so that only the inner pin goes into the socket.

Or try using a set-top aerial if you have one as this will pick up less signal.

Not all equipment is the same and of the same sensitivity, so don't think that there is a fault with the Humax just because the Panasonic works fine.

link to this comment
Dave Lindsay's 5,724 posts GB flag
Sunday, 11 March 2012
D
Dick
1:06 PM

Thanks Dave. I'll give that a go later.

Cheers

Dick

link to this comment
Dick's 7 posts GB flag
Monday, 12 March 2012
J
Joanne
7:47 PM

I have a bush HD television with built in freeview. wa snot reviebing signal so did a retune not got all channels like itv, channel 4 5 itv2 E4.... tried unplugging and retuning without and with arial in. still not working. what can i do?

link to this comment
Joanne's 8 posts GB flag
J
jb38
sentiment_very_satisfiedPlatinum

8:13 PM

Joanne: As your query is one involving a reception problem then its essential that you provide your location, with this preferably done in the form of a post code, as only then can the signal conditions expected in your area be assessed.

You could maybe also provide the model number of your Bush TV.

link to this comment
jb38's 7,179 posts GB flag
Select more comments

Your comment please
Please post a question, answer or commentUK Free TV is here to help people. If you are rude or disrespectful all of your posts will be deleted and you will be banned.







Privacy policy: UK Free Privacy policy.