menuMENU    UK Free TV logo Help!

 

 

Click to see updates

What connections are used from set top box to TV (such as SCART) ?

What connections are used from set top box to TV (such as SCART) ?

What connections are used from set top box to TV (such as SCART
published on UK Free TV

You can use the following ways to connect a set-top box to a TV:

1. SCART on STB to SCART on TV. This provides the best possible connection, with stereo sound and "RGB" highest quality connection;

2. SCART on STB to composite on TV. Older TVs without SCART connections usually have "composite" inputs, usually three "phono" sockets (often red, white and yellow). This offers stereo sound and good picture quality. You will need a special cable from a high-street retailer.

3. UHF ("aerial lead") box to TV. This requires that the STB you choose (all Sky, MOST Freeview) has a UHF output. You will need to "tune" the TV into the box, and you will get OK pictures and only mono sound.

If you are stuck with mono or poor quality sound on the TV, you can still use the SCART output (and the same cable as 2) to a separate amplifier to listen in stereo.



All questions
BBC Three Linear channel re-opens1
Removing all barriers to communication between diverse cultures2
How do I get a test card with Freeview3
What can I do when my Sky Digibox says 'No Signal' or 'Technical fau4
Can I receive UK TV in Ghana?5
In this section
Are all Widescreen TVs digital?1
If you have several TVs at home do you need separate decoders for each set or is2
My video doesn't work with my digital TV box, help!3
Can I use a Freeview box if there is no SCART connector on my TV?4
My TV is NICAM, does that mean I have digital TV?5
Why has my widescreen TV just made everyone look fat?6

Comments
Monday, 16 February 2015
J
jb38
sentiment_very_satisfiedPlatinum

10:08 PM
Dundee

Gerry Chris: If when you say that the new DVD player will not work through the Sky box but does when connected directly into the TV, are you testing the DVD player by simply disconnecting the Sky boxes scart connector "on the TV" (not box) and replacing it with another cable coming from the new DVD player? if you are then try the same test again but placing the TV back onto Freeview first before connecting the DVD into it, making sure that the DVD is switched off first.

Does the TV switch over to the DVD player when you switch it on? if it doesnt then this indicates that pin 8 on either the scart or the new DVD has not been connected, try another scart lead.


link to this comment
jb38's 7,179 posts GB flag
jb38's: mapJ's Freeview map terrainJ's terrain plot wavesJ's frequency data J's Freeview Detailed Coverage
Tuesday, 17 February 2015
J
jb38
sentiment_very_satisfiedPlatinum

8:24 AM

Gerry Chris: My reply was given based on the assumption that your DVD player is connected into the Sky boxes VCR scart socket, the Sky boxes output being connected into the TV, and that what you are meaning is that you are unable to get the DVD player to connect into the TV (via the Sky box) even although the Sky box has been placed on standby "before" switching the DVD player on.

If the aforementioned is correct? then that said in the latter paragraph of my previous reply is the most likely reason for your problem, that is unless you are using a variation of the procedure mentioned?

link to this comment
jb38's 7,179 posts GB flag
Tuesday, 22 December 2015
P
Peter
12:57 PM

I want to connect a humax set top, a sky box and Panasonic DVD recorder to lg tv. If somebody could help me please.

link to this comment
Peter's 1 post GB flag
M
MikeB
sentiment_very_satisfiedPlatinum

1:38 PM

Peter: Ideally, we need the model numbers of the various bits of kit, and how many HDMI's, scarts etc they have.

However, at a guess, I'm assuming your TV has at least 2 HDMI's and a scart. The Sky box (if its not HD) should go via scart into the back of the TV, and thats it. The DVD recorder is likely to have an HDMI, as is the Humax, so use those HDMI ports. The aerial leads goes from the Humax, and then through via the DVD recorder into the back of the TV.

Model numbers would really help.

link to this comment
MikeB's 2,579 posts GB flag
Saturday, 6 August 2016
L
Lee
7:32 AM

Bedroom TV and HDMI free view recorder
Scart lead to free v r does it go in to VCR or TV slot

link to this comment
Lee's 2 posts GB flag
L
Lee
7:36 AM

Small bedroom TV and free view HDMI recorder
Scart lead from TV to FV recorder does it go into slot marked TV
Or slot marked VCR

link to this comment
Lee's 2 posts GB flag
R
Richard Cooper
sentiment_satisfiedGold

8:10 AM

Lee: Hi, Lee. I have a Topfield video recorder which provides the Freeview signal to my tv set by a SCART lead. The SCART lead is plugged into the TV SCART connection on the back of the recorder because neither my recorder nor my tv has an HDMI connection. If my recorder and tv had HDMI connections I would have used HDMI instead of SCART because that would have meant I could view HD programmes, which I can't with my current recorder and tv set. Obviously, the aerial fly-lead gives the recorder a Freeview signal, with that being fed by the SCART lead to give the tv its video and audio. Hope this will assist you, Richard. PS I am sorry that I didn't respond to your posting nearer to the time you sent it, but I didn't get UKFREE.TV up on my laptop until 8 a.m.'ish.

link to this comment
Richard Cooper's 466 posts GB flag
M
MikeB
sentiment_very_satisfiedPlatinum

6:53 PM

lee: If the recorder has HDMI, and the TV has HDMI....just use HDMI. And the loop the aerial through via the recorder to the TV.

link to this comment
MikeB's 2,579 posts GB flag
Monday, 12 December 2016
C
Caroline Brown
9:24 PM

I have just brought a new set top free view box, connecting it all up with a scart lead and Ariel lead, I have followed the instructions and tried to tune it into my tv but for some strange reason it just won't work. When it is trying to tune the channels in there is just no signal appearing and a notice keeps appearing on my tv saying cannot tune, no signal!! I have tried everything I am going beserk. Please can you go over where actually the scart lead from the back of the set top box goes into AV1 or AV2 scart connections in the back of my LG tv and does the Ariel lead go into the box and tv or the box and Ariel port in my wall? Please help me asap as I've had no tv for 3 days now. Thankyou.

link to this comment
Caroline Brown's 1 post GB flag
S
StevensOnln1
sentiment_very_satisfiedPlatinum

10:38 PM

Caroline Brown: Whether you use AV1 or AV2 shouldn't matter as long as you select the correct input on your TV. The aerial cable has to connect from the socket on the wall to the aerial input on the box. If you are still struggling, please let us know the make and model of your Freeview box so someone can assist further.

link to this comment
StevensOnln1's 3,605 posts GB flag
Select more comments

Your comment please
Please post a question, answer or commentUK Free TV is here to help people. If you are rude or disrespectful all of your posts will be deleted and you will be banned.







Privacy policy: UK Free Privacy policy.