Full Freeview on the Hannington (Hampshire, England) transmitter
 | Google Streetview |  | Google map |  | Bing map |  | Google Earth |  | 51.308,-1.245 or 51°18'28"N 1°14'43"W |  | RG26 5UD |
The symbol shows the location of the Hannington (Hampshire, England) transmitter which serves 470,000 homes. The bright green areas shown where the signal from this transmitter is strong, dark green areas are poorer signals. Those parts shown in yellow may have interference on the same frequency from other masts.
This transmitter has no current reported problems
The BBC and Digital UK report there are no faults or engineering work on the Hannington (Hampshire, England) transmitter._______
Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
Which Freeview channels does the Hannington transmitter broadcast?
If you have any kind of Freeview fault, follow this Freeview reset procedure first.Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
Which BBC and ITV regional news can I watch from the Hannington transmitter?
BBC South Today 1.3m homes 4.9%
from Southampton SO14 7PU, 46km south-southwest (194°)
to BBC South region - 39 masts.
ITV Meridian News 0.9m homes 3.4%
from Whiteley PO15 7AD, 48km south (179°)
to ITV Meridian/Central (Thames Valley) region - 15 masts.
Thames Valley opt-out from Meridian (South). All of lunch, weekend and 50% evening news is shared with all of Meridian+Oxford
How will the Hannington (Hampshire, England) transmission frequencies change over time?
| 1984-97 | 1997-98 | 1998-2012 | 2012-13 | 18 Apr 2018 | |||||
| E | E | E | B E T | W T | |||||
| C32 | com7 | ||||||||
| C34 | com8 | ||||||||
| C35 | C5waves | C5waves | |||||||
| C39 | BBC1waves | BBC1waves | BBC1waves | +BBCB | BBCB | ||||
| C40 | SDN | ||||||||
| C41 | SDN | ||||||||
| C42 | ITVwaves | ITVwaves | ITVwaves | D3+4 | D3+4 | ||||
| C43 | ArqA | ||||||||
| C44 | ArqA | ||||||||
| C45 | BBC2waves | BBC2waves | BBC2waves | BBCA | BBCA | ||||
| C46 | ArqB | ||||||||
| C47 | ArqB | ||||||||
| C51tv_off | _local | ||||||||
| C55tv_off | com7tv_off | ||||||||
| C56tv_off | COM8tv_off | ||||||||
| C66 | C4waves | C4waves | C4waves |
tv_off Being removed from Freeview (for 5G use) after November 2020 / June 2022 - more
Table shows multiplexes names see this article;
green background for transmission frequencies
Notes: + and - denote 166kHz offset; aerial group are shown as A B C/D E K W T
waves denotes analogue; digital switchover was 8 Feb 12 and 22 Feb 12.
How do the old analogue and currrent digital signal levels compare?
| Analogue 1-4 | 250kW | |
| Analogue 5 | (-6.2dB) 60kW | |
| BBCA, D3+4, BBCB | (-7dB) 50kW | |
| com7 | (-8.3dB) 36.7kW | |
| com8 | (-9.8dB) 26.2kW | |
| SDN, ARQA, ARQB | (-10dB) 25kW | |
| Mux 1*, Mux 2*, Mux A*, Mux B* | (-11dB) 20kW | |
| Mux C*, Mux D* | (-14dB) 10kW |
Which companies have run the Channel 3 services in the Hannington transmitter area
|
|
Thursday, 9 February 2012
HANNINGTON transmitter - Freeview - No problems - BBC Digital TV Off Air from 01:28 today to 04:34 today BBC Digital TV Very Weak Signal; DSO related from 13:55 yesterday to 01:28 today BBC Digital TV Off Air; DSO related from 13:46 yesterday to 13:55 yesterday Analogue BBC ONE Weak Signal from 11:31 yesterday to 01:28 today BBC ONE Off Air; DSO related from 00:06 yesterday to 03:03 yesterday BBC ONE Off Air from 01:28 today to 04:34 today [BBC]
| link to this comment |
Andy Fraser
12:50 PM
Fleet
12:50 PM
Fleet
Gh: Your problem is not the aerial. It's just that you are picking up some signals from the wrong transmitter. As DSO progresses and the power is increased, more distant transmitters become receivable which perhaps were not when you previously tuned your receiver. Without knowing your location, it's difficult to suggest a method to scan channels from only the correct trasnmitter. Manually tuning 40, 41, 43, 44, 45, 46 will give only Hannington channels (until 22nd Feb).
| link to this comment |
Andy's: mapA's Freeview map terrainA's terrain plot wavesA's frequency data A's Freeview Detailed Coverage
Andy Fraser
12:54 PM
Fleet
12:54 PM
Fleet
The multiple Transmitter Engineering messages are very confusing as they seem to be mixing up today with yesterday. This is not helpful.
| link to this comment |
Andy's: mapA's Freeview map terrainA's terrain plot wavesA's frequency data A's Freeview Detailed Coverage
M
Mike Dimmick1:00 PM
Gh: You're in the 'Guilford Notch', an area where digital signals from Hannington were severely reduced to avoid affecting the analogue transmissions from Guildford, which use the same channels as Hannington's low-power signals.
For you, the difference between the old and new power levels is not 4 dB (2.5x). It's 26 dB (nearly 400x). Many boxes will be 'desensitised' if receiving a loud signal on one channel - it affects adjacent channels most, but nearby channels are also affected.
You will have to wait until 22 February to get ITV/C4/C5 and the other channels listed under Multiplex 2 back. The commercial channels will remain restricted until Guildford switches over: the ArqA multiplex will be derestricted on 4 April and finally SDN and ArqB on 18 April.
It's likely that you had a very big aerial and probably additional amplification to get digital from Hannington at all, before now. It's very likely that you will have too much signal after one of those dates - you will probably need to remove the amplification. Too much signal causes distortion, which causes a lot of errors, often too many to be corrected.
| link to this comment |
K
KMJ,Derby1:01 PM
Gh: Unless the aerial is obviously defective it is best to avoid having aerial work done until the full DSO process is complete, which in the case of Hannington ( and coincidentally Crystal Palace) is 18th April 2012. At present you are only predicted to be able to (reliably) receive Mux BBCA, with Mux D3+4 and MuxHD becoming available on 22nd February 2012. The COM muxes will adopt full power working on 4th April (SDN) and 18th April (ArqA and ArqB). If your receiver permits manual tuning try doing a factory reset, then manually insert C43 to see if it will still find and store low power Mux2. Do the same for C40 C41 and C44 before entering C45. Also check that all connectors are in order and not losing any signal through poor contact.
| link to this comment |
M
Mike Dimmick1:06 PM
Andy Fraser: "Transmitter Engineering" simply scrapes the BBC's Reception Problems wizard - click 'BBC Reception Test' next to your post. The BBC keep about a week's worth of data but show it as 'today', then 'yesterday', then as a date. "Transmitter Engineering" posts a new comment if the text changes, which means that it will post essentially the same information at least three times: on the date it occurred, the day after it occurred, and two days after.
I don't know if Briantist could clean it up so that "Transmitter Engineering" converted 'today' and 'yesterday' to dates, before comparing. It would be clearer if they were posted as dates. It would also be clearer if each item was on a separate line, rather than all being run together.
It also scrapes Digital UK's Planned Engineering Works page at
Digital UK - Planned Engineering Works .
| link to this comment |
Andy Fraser: The engineering information is provided by the BBC, the wording is theirs and they do not wish it to be changed in any way.
| link to this comment |
K
KMJ,Derby1:18 PM
Gh and DaveG: After reading Mike's post above I checked and discovered that it is C44 that is released by Guildford on 4th April 2012, so as Mike said Mux ArqA will switch to full power on that date, with SDN and ArqB following on 18th April 2012.
| link to this comment |
T
trevor2:01 PM
retuned the digital tv, got my bbc 1 and 2,
now I have lost itv1,ch4 and ch 5, which i had perfectly before the switchover
| link to this comment |
G
Gh3:10 PM
Camberley
Hi andy my location is frimley green gu16 6lp with signal from hannington. To get hannington before dso you are right i do have a variety of amplification and splitting going on. Can you advise as how to tune manually for the itv,4,5 etc channels. Would an over amplified signal show as either" low or no signal" when i check strength rgs
| link to this comment |
Gh's: mapG's Freeview map terrainG's terrain plot wavesG's frequency data G's Freeview Detailed Coverage
Select more comments
Your comment please